Procedure Operations

Perform various NC Procedure operations. A Procedure is a set of cutter movements that conform to a specific machining technology. One or several Procedures can comprise a toolpath.

The maximum number of toolpath folders in an NC file is 2000.

A procedure can be created from within Cimatron or from a template.

  • Create a Procedure

After a procedure has been created, the following operations can be performed on the procedure.

  • Cut, Copy, Paste or Delete a Toolpath/Procedure
  • Divide a Long Finishing Procedure by Multi Cutters
  • Divide Procedures by Cutter Change
  • Edit a Procedure
  • Execute a Toolpath/Procedure
  • NC Assistant
  • NC Templates
  • Optimizer
  • Previewing a Procedure
  • Procedure Parameter Tables
  • Motion Parameters Tables - define tool motions for procedure operations
  • Cutters and Holders Parameters Table - display the defined parameter settings
  • Machine Parameters Table - define machining behavior during procedure operations
  • Geometry Parameters Table - picking geometry for procedure operations
  • Previous Cutter Location Connection
  • Procedure Selection & Reorder
  • Remaining Stock
  • Select all Toolpaths/Procedures
  • Suspend a Procedure

Some functionality may be dependent on the product package. Contact your Reseller if you require a license.